Telecommunications &
Networks
Precision engineering and reliable thermal management are non-negotiable in telecommunications infrastructure. CANEX produces aluminum enclosures, base station housings, antenna mast sections, and heat sink profiles for telecom OEMs and network infrastructure builders worldwide.
Telecom Infrastructure
Telecommunications infrastructure demands aluminum profiles that meet the most exacting engineering standards — precise dimensional tolerances for sealed enclosure assembly, complex multi-chamber hollow sections for integrated cable management, and thermal conductivity optimisation for base station heat sink profiles.
CANEX manufactures the full range of telecom aluminum extrusions — from complex hollow cabinet sections and IP67-compatible enclosure profiles to finned heat sink extrusions and structural antenna mast members. Our 6063 alloy profiles deliver the optimal combination of thermal conductivity, corrosion resistance, and mechanical properties for demanding outdoor network infrastructure environments.
ISO 9001:2015 certification and CE Mark conformity documentation are supplied with every shipment, supporting the rigorous procurement and quality assurance processes of global telecom OEMs and infrastructure contractors.
Telecom Application
Telecom Cabinet Section Profiles
Multi-chamber hollow aluminum extrusions for telecom cabinet construction — frame sections, side panel extrusions, top/base channels, and door frame profiles. Tight tolerances for IP-rated sealed assembly.
Request Samples →Antenna Mast Extrusions
Structural hollow and solid sections for antenna support mast and tower construction. 6061-T6 and 6082-T6 alloys for high tensile strength in outdoor structural applications. QUALICOAT Seaside powder coating available.
Get a Quote →Base Station Housing Profiles
Precision multi-chamber hollow sections for 5G and LTE base station outdoor housing construction. Powder-coated for weather and UV resistance; tight tolerances for gasket-sealed weatherproof assembly.
Get a Quote →Heat Sink Extrusions
Custom finned heat sink profiles in 6063 alloy (thermal conductivity ~200 W/m·K) for active and passive cooling of base station electronics, power amplifiers, and network equipment. Custom fin pitch, height, and base thickness available.
Request Samples →Outdoor Enclosure Sections
Weatherproof enclosure frame and panel extrusions for outdoor telecom equipment installations. Anodized or QUALICOAT Seaside powder-coated; compatible with IP67 sealing systems.
Get a Quote →Equipment Rack Frame Profiles
Structural frame extrusions for equipment rack and cabinet construction — vertical rack uprights, cross-member sections, and mounting rail profiles for indoor network equipment installations.
Submit Your Drawing →Used
Mobile Base Station Enclosures
Multi-chamber hollow aluminum sections for 4G/5G base station outdoor housing construction in urban and rural network deployments.
Antenna Support Mast Sections
Structural aluminum tube and section extrusions for mobile antenna support mast and monopole structures in network infrastructure installations.
Network Equipment Cabinets
Precision frame and panel extrusions for indoor and outdoor network equipment cabinet construction in data centres and telecom exchanges.
Outdoor Telecom Housings
Weatherproof aluminum enclosure profiles for roadside, rooftop, and pole-mounted outdoor telecom equipment in all climate environments.
Data Centre Cooling Profiles
Finned heat sink extrusions and thermal management profiles for data centre server cooling, power electronics, and network switching equipment.
Microwave Link Housings
Precision hollow aluminum sections for point-to-point microwave link housing construction in telecom backbone and enterprise network infrastructure.
| Parameter | Specification |
| Primary Alloys | 6063-T5/T6 (enclosures, heat sinks); 6061-T6 (structural mast); 6082-T6 (heavy structural) |
| Thermal Conductivity | ~200 W/m·K (6063 alloy) for heat sink profiles |
| Surface Finishes | Powder coating (QUALICOAT Seaside for outdoor); anodizing; mill finish |
| Powder Coat Thickness | 60–80 µm standard; up to 120 µm for demanding outdoor environments |
| IP Compatibility | Tight tolerances for IP67-compatible gasket-sealed enclosure assembly |
| CCD Range | Up to 200 mm typical; up to 350 mm on request |
| Wall Thickness | From 1.5 mm to 20+ mm depending on application |
| Length | Standard 6 m; custom lengths to 7 m on request |
| Certifications | ISO 9001:2015, CE Mark; QUALICOAT Seaside available; full material test certificates |
Choose CANEX
Complex Hollow Section Capability
Multi-chamber hollow sections for integrated cable management, gasket grooves, and structural stiffeners within a single extruded profile — reducing assembly complexity and component count.
Thermal Management Expertise
Custom heat sink fin configurations designed and manufactured in-house — optimising thermal resistance for specific base station power dissipation requirements.
Tight Tolerances for Sealed Enclosures
Precision-extruded flat mating surfaces and consistent cross-sections enable effective IP67 gasket sealing — critical for outdoor telecom equipment protection.
ISO 9001 & CE Documentation
Full quality documentation package — ISO 9001:2015, CE Mark, material test certificates, and EN 755 dimensional reports — meeting telecom OEM procurement requirements.
Networks Questions
What aluminum profiles does CANEX supply for telecom enclosures?
CANEX supplies precision multi-chamber hollow aluminum extrusions for telecom enclosure construction — cabinet frame sections, side panel extrusions, top/base channels, and door frame profiles. 6063-T5/T6 alloy is standard; tight tolerances ensure IP67-compatible sealed enclosure assembly. Powder-coated finishes for outdoor corrosion resistance are available.
What aluminum mast profiles does CANEX supply for antenna towers?
CANEX manufactures structural aluminum mast and tower sections for antenna support structures — hollow tube sections, cross-member extrusions, and mounting bracket profiles. 6061-T6 and 6082-T6 alloys are used for their high tensile strength and corrosion resistance in outdoor environments. QUALICOAT Seaside powder coating is available for coastal installations.
Does CANEX supply heat sink extrusions for base stations?
Yes. CANEX manufactures finned heat sink extrusions and thermal management profiles for telecom base station equipment cooling. 6063 alloy is preferred for its excellent thermal conductivity (approximately 200 W/m·K). Custom fin configurations — fin pitch, height, and thickness — can be designed to meet specific thermal performance requirements.
Can CANEX produce IP67-compatible aluminum enclosure profiles?
Yes. CANEX supplies tight-tolerance aluminum extrusions for IP67-rated outdoor enclosure assembly. Our precision-extruded profiles enable the flat mating surfaces and consistent cross-sections required for effective gasket sealing in sealed outdoor telecom housings.
Is CANEX ISO 9001 certified for telecom supply chain?
Yes. CANEX holds ISO 9001:2015 certification. We can provide full material test certificates, EN 755 dimensional conformity documentation, and surface finish reports — the documentation package required by telecom OEM and infrastructure procurement processes.
Can CANEX produce custom telecom cabinet profile cross-sections?
Yes. CANEX offers in-house die design and manufacture for custom telecom cabinet and enclosure profiles. Submit your DXF or CAD cross-section drawing and our engineers will review for extrudability and deliver first samples typically within 4–6 weeks.
Send us your cross-section drawings or enclosure requirements and our team will respond within 48 hours.