Transportation &
Mobility
Aluminum's unmatched strength-to-weight ratio drives adoption across rail, automotive, bus, and aerospace. CANEX supplies precision-extruded profiles and die-cast components to transportation OEMs requiring consistent alloy composition and tight dimensional tolerances.
Transport OEMs Worldwide
The transportation industry's drive toward lighter, more fuel-efficient, and lower-emission vehicles has made aluminum the structural material of choice across every mode of transport — rail, road, and beyond.
CANEX supplies precision-extruded aluminum profiles and die-cast components to transportation OEMs — from metro rail car body sections and automotive structural extrusions to bus floor profiles and truck cab sections. Our manufacturing combines consistent alloy composition, tight dimensional tolerances, and full material traceability to meet the demanding quality standards of transportation supply chains.
With both extrusion and die casting in-house, CANEX can supply complete aluminum component programs — profiles, castings, and finishing — from a single source.
Every Transport Mode
Rail Car Body Profiles
Hollow extrusions and structural sections for metro, light rail, and mainline rail car body construction in 6063-T6 and 6061-T6. Full material traceability and CE Mark documentation available.
Request Rail Profiles →Automotive Structural Extrusions
Crash management sections, sill profiles, roof rails, and structural automotive extrusions in 6061-T6 and 6063-T6 with tight dimensional tolerances for automated assembly lines.
Request Automotive Profiles →Bus & Coach Frame Sections
Floor beam sections, roof bow profiles, side pillar extrusions, and structural frame members for bus, coach, and minibus body manufacturers — custom or standard cross-sections.
Request Bus Profiles →Truck Body Profiles
Floor planks, side panel extrusions, tailgate sections, and cab structural profiles for truck and trailer body builders. Available in multiple alloys and finish options.
Request Truck Profiles →Die-Cast Transportation Components
LPDC and gravity die castings in A380 and A360 alloys for transportation structural nodes, brackets, connector housings, and complex geometry components.
View Die Casting →Custom OEM Profiles
Proprietary cross-sections for transportation OEMs — in-house die design, manufacture, and first article sampling within 4–6 weeks. Full dimensional inspection and material certification.
Submit Your Drawing →Used
Train & Metro Car Bodies
Aluminum body section profiles for metro, light rail, and mainline rail car construction meeting passenger rail specifications worldwide.
Monorail Systems
Structural aluminum profiles for monorail beam sections, vehicle body structures, and station infrastructure components.
Automotive Body Panels
Sill profiles, crash management sections, and structural extrusions for automotive body-in-white and body-on-frame applications.
Bus Floor & Roof Sections
Floor plank extrusions, roof bow profiles, and side pillar sections for bus, coach, and minibus manufacturers globally.
Truck Cab Profiles
Structural and body profiles for truck cab assemblies, flat-bed trailer floors, and refrigerated truck body panels.
Aerospace Structural Members
High-strength 6061-T6 and 7075-series extrusions for aerospace structural applications requiring tight tolerances and full material certification.
| Parameter | Specification |
| Extrusion Alloys | 6063-T6 (standard), 6061-T6 (structural), 7075 (available on request) |
| Die Casting Alloys | A380, A360 (LPDC and gravity casting) |
| Dimensional Tolerance | EN 755 Class B (tight tolerance standard for transportation) |
| Wall Thickness | From 1.2 mm (extrusion minimum for transportation applications) |
| Circumscribed Circle Diameter | Up to 350 mm (standard press capacity) |
| Length | Standard 6 m; custom lengths to 7 m |
| Surface Finishes | Mill finish, anodizing, powder coating — per OEM specification |
| Documentation | Material certificates, chemical composition, mechanical properties, dimensional inspection |
| Certifications | ISO 9001:2015, CE Mark, full material traceability |
OEMs Choose CANEX
Weight Reduction Expertise
We understand transportation weight targets and design profiles that minimise mass while meeting structural load requirements — directly impacting fuel efficiency and range.
Complex Profile Capability
Multi-void hollow sections, asymmetric shapes, and OEM-proprietary cross-sections — all manufactured in-house with die design and first article inspection included.
Full Material Traceability & Certs
Every profile and casting ships with chemical composition, mechanical properties, and dimensional inspection documentation — meeting the strictest OEM supply chain requirements.
Scalable Production Volumes
From prototype quantities to long-run production supply — CANEX scales with your program, with consistent quality across all production runs.
Mobility Questions
What aluminum products does CANEX supply for rail and transportation?
CANEX supplies extruded aluminum profiles and die castings for the full transportation spectrum — rail car body sections, monorail profiles, automotive structural extrusions, bus and coach frame sections, truck body profiles, and custom OEM shapes. All products are manufactured to ISO 9001:2015 with full material traceability.
What alloys does CANEX use for automotive and transportation extrusions?
CANEX uses 6063-T6 for standard transportation profiles, 6061-T6 for structural automotive and rail applications, and 7075 alloy is available on request for aerospace-grade high-strength applications. All alloys are supplied with full material certificates and chemical composition reports.
Does CANEX supply aluminum die castings for transportation components?
Yes. CANEX operates both low-pressure die casting (LPDC) and gravity casting (GC) facilities, supplying A380 and A360 alloy die castings for transportation structural nodes, brackets, connector housings, and complex geometry parts — all with full dimensional inspection and material traceability.
Can CANEX produce custom OEM aluminum profiles for transportation manufacturers?
Yes. CANEX provides a complete in-house die design and manufacturing service for transportation OEMs. Submit your cross-section DXF or CAD drawing, and our engineers will assess extrudability, manufacture the die, and deliver first article samples with dimensional inspection reports within 4–6 weeks.
Is CANEX ISO 9001 certified for transportation supply chain requirements?
Yes. CANEX is ISO 9001:2015 certified across all production processes. We issue material test certificates, chemical composition reports, mechanical property test reports, and dimensional inspection documentation — meeting the requirements of major transportation OEM supply chains.
Can CANEX deliver aluminum transportation profiles to North America and Europe?
Yes. CANEX offers DDP (Delivered Duty Paid) delivery to transportation manufacturers in North America, Europe, and across MENA. We manage all customs clearance, freight, and logistics documentation — simplifying international procurement for transportation OEMs.
Submit your OEM cross-section drawings or component requirements and our team will respond within 48 hours.